Troubleshooting Manual for Stewart Golf X7 Lithium Battery Charger, Golf Trolleys (1 pages)
Data: UPD 12th February 2024
Stewart Golf X7 Lithium Battery Charger, Golf Trolleys PDF Troubleshooting Manual (Updated: Monday 12th of February 2024 08:00:36 PM)
Rating: 4.1 (rated by 92 users)
Compatible devices: T-CHARGE 18, X3R, AC VQ11, X9 FOLLOW, X Follow Series, Q Series, VDS-ST1AU, F1-S REMOTE.
Recommended Documentation:
Text Version of Stewart Golf X7 Lithium Battery Charger, Golf Trolleys Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 12 February 2024)
X7 Lithium Remote
Trouble Shooting Guide
Problem
Possible Cause
Explanation / Solution
The X7 is not
responding to button
commands.
Battery not connected
Connect the battery to the electronics
box.
Safety switch is off
Turn the switch on. The Safety Switch
is located on the rear cover.
Remote battery is dead
If the red transmitter light is weak,
replace the 9V battery.
Main battery is dead
Allow the charger to complete an entire
cycle.
You may be out of
range
The X7 has a set range of 55 yards.
Range can be increased or decreased
by local factors (terrain \ radio
interference).
I can hear the motors
working but the motor
caddie is not moving
Rear wheels are in
freewheel mode
Press the black quick release button in
and engage the wheels into the metal
drive dogs.
I find it difficult to push
my X7
Freewheel mode is not
engaged
Use the quick release mechanism to
put the rear wheels onto freewheel
mode.
My X7 occasionally
starts without me
pressing a button
Strong interference
The X7 may sometimes react to
interference; however the electronics
will recognize this and quickly stop the
X7.
I have lost my X7
remote control
Please contact Stewart Golf Canada to
purchase a replacement.
The X7 moves in circles
when pressing the
forward button
One wheel engaged,
one in freewheel mode
Ensure that both wheels are not in the
freewheel position.
The X7 does not travel
in a straight line even
on level ground
Motors have become
imbalanced
Follow the ‘trim adjustment’ instructions
on page 9.
Recommended:
LS950, 742AV, PN51D6500, ES1220n
S5 connect, ZIP Series, ForeCaddy, X4, ZIP Series
-
CBM2 WHEEL SPRING REPLACEMENT INSTRUCTIONS Step 1: Remove the wheel from the buggy and remove the 2 screws which secure the black cap around the wheel removal button as per Figures: 1&2 Step 2: Remove the black Retaining Ring and t ...
Model & Doc Type: CBM2 2
-
SEAT, SAND BUCKET LOOP, SAND BOTTLE INSTALLATION The seat for your MGI Zip Buggy is designed to be installed on the Right hand side of your buggy. Once installed, your horizontal seat stem should look like the below image. 1. To insert the horizontal seat stem ensure the coloured leaver und ...
Model & Doc Type: ZIP Series 5
-
00937-01-01Your PowaKaddy trolley is simple to maintain. Never jet wash your trolley or immerse into water. Occasionally remove the wheels and apply grease to the axle and moving parts.Your serial number can be found on the underside of the central tube under the upper bag stay. Keep ...
Model & Doc Type: FW3 2
-
5 6 V 17– 01© 2017 TiCad GmbH & Co. KG – All rights reserved. YOUR NOTESTechnical data and dimensionsModel TiCad CantoWeight of frame and wheels 3,9 kgPack size 68x38x14 cmPUBLISHERTiCad GmbH & Co. KG, Heegwaldstr. 3–5, D-63674 Altenstadt www.ticad.deThe above information, w ...
Model & Doc Type: CANTO 5
Operating Impressions, Questions and Answers:
