SteelMax D1PRO Operator's Manual

18, D1PRO D1 PRO 11-2011 Operators manual for D1 PRO Drilling Machine - 18 - 4.10 Adjusting gib clearance The gib should not need to be adjusted often. However if the slide sticks or becomes somewhat loose it can be adjusted as follows: The drive and the slider (1) can be slid up and down…

8, D1PRO D1 PRO 11-2011 Operators manual for D1 PRO Drilling Machine - 8 - 4. START UP AND OPERATION 4.1 Cutters and optional equipment features. This drilling machine’s spindle has a Weldon Shank type socket 3/4” or 19.05 mm and is specifically designed for use with milling cutte…

36, SteelMax D1PRO D1PRO Steelmax Tools LLC 112 Inverness Circle East, Englewood, CO. 80112 1-87STEELMAX Fax 303-690-9172 www.steelmax.com e-mail: [email protected] 11. WARRANTY CARD WARRANTY CARD No............. ……………………………………………

1, Steelmax Tools LLC 112 Inverness Circle East, Englewood, CO. 80112 1-87STEELMAX Fax 303-690-9172 www.steelmax.com e-mail: [email protected] SAFETY INSTRUCTIONS AND OPERATORS MANUAL FOR DRILLING MACHINE D D 1 1 P P R R O O …

3, D1PRO D1 PRO 11-2011 Operators manual for D1 PRO Drilling Machine - 3 - CONTENT 1. GENERAL INFORMATION ...................................................................................................... - 4 - 2. GENERAL SAFETY ADVICE .....................................…

15, D1PRO D1 PRO 11-2011 Operators manual for D1 PRO Drilling Machine - 15 - 4.8 Working in difficult areas While working in difficult access areas as well as left-handed operator, one can change location of the pinion with spoke handles to the other side of drilling machine. Dra…