Stahl SH 3 Operating And Maintenance Instructions Manual

Operating And Maintenance Instructions Manual for Stahl SH 3 Lifting Systems, Winches (68 pages)

Specifications:

862/862917-sh_3.pdf file (22 Feb 2024)
  • Manufacturer: Stahl
  • Category of Device: Lifting Systems, Winches
  • Document: SH 3, File Type: PDF Operating And Maintenance Instructions Manual
  • Updated: 22-02-2024
  • Count of Pages: 68
Download SH 3 Manual (68 pages)

Read PDF Document Online:

Data: UPD 22nd February 2024

Stahl SH 3 Lifting Systems, Winches PDF Operating And Maintenance Instructions Manual (Updated: Thursday 22nd of February 2024 03:09:21 AM)

Rating: 4.5 (rated by 44 users)

Compatible devices: P54, TE-03, Liko HygieneVest 50, PTC 750 S, HD-P10000, 23225, SH Series, XPR-9FS.

Recommended Documentation:

  • V-3600 Assembly instructions manual (UPD: 30 Sep 2023, floe/v-3600.pdf) ()
  • TJ470 Owner's manual (UPD: 01 Apr 2024, trestlejacks-usa/tj470.pdf) ()
  • H28TJ+ Maintenance book (UPD: 07 Sep 2023, haulotte/h28tj.pdf) ()
  • PCB-S1 User manual manual (UPD: 25 Oct 2023, powertex/pcb-s1.pdf) ()
  • aXs2 Owners manual & maintenance procedures (UPD: 08 Apr 2024, s-r-smith/axs2.pdf) ()

Text Version of Stahl SH 3 Lifting Systems, Winches Manual (Summary of Contents)

(Ocr-Read of Stahl SH 3 Document (Main Content), UPD: 22 February 2024)

  • 18, BASH_02_1.FM 3 Installation 18 End stops • Mount end stops with rubber buffers at end of runway. Suggestion for solution by customer *1 Incl. counterweight *2 Travel speed V max.: 20 m/min. *3 E = 0.1415 • mka • v 2 • x (Nm) mka (t), v (m/min) x = with travel limit switch: 0…

  • 35, BASH_02_1.FM 6 Inspection and maintenance 35 6.5 Hoist limit switch (versions) N.B.: The hoist limit switch version installed must be determined on the basis of the sticker in the limit switch (see stickers). 6.5.1 Standard crane - version I (Fig. 1/2) See chapter 6.6 for descriptio…

  • 66, BASH_02_1.FM 9 Wearing parts 66 9.1 Serial number When ordering original spare parts, please always indicate the serial number of the hoist. This is affixed to the inside of the bearing support plate (see sketch). 9.2 Hoist RSM hoist motor brake Rope guide Wire rope (E) See wo…

  • 54, Stahl SH 3 BASH_02_1.FM 6 Inspection and maintenance 54 6.13 Remaining service life According to FEM 9.755, the operating mode and operating time must be established by the user, see page 2, and recorded in the test log book in order to calculate the remaining service life. After the serv…

  • 22, BASH_02_1.FM 3 Installation 22 3.7.8 Overload cut-off Description of system • prevents an overload being lifted. If an overload has been established, the load can only be lowered. The switch is set in the factory. Corrections are only permissible in special cases, see page 57. In certain appl…

  • 56, BASH_02_1.FM 7 Fault-finding 56 7.1 What is to be done if? (continued) 7.1.8 Load is not lifted • SLE21 load monitor / SMC21 Multicontroller has been actuated or is faulty. 1. Check setting, see page 46. 2. Actions for SLE21 / SMC21 LED I...III "on" and LED err => error. Actio…

DOC-ac21e69c:

Recommended:
DieselJet 445, Spearpad, RX-497, NNTN7983A

Links & Tools
MR14, Q4P09 Series, MEGA GCB-2, S-FORK-4-AT, SL-26, MBT Series
  • CHIEF
    CM2C40

    CLICKwww.chiefmfg.comCALL800.582.6480FAX877.894.6918automated mountsSPECIFICATIONSFEATURESTECHNICAL DRAWINGSWHAT YOU NEED TO KNOWRECOMMENDED ACCESSORIES80cm2c40 32 - 61” CEILING LIFTAutoDrivE™ systEM Ultra fast and quiet travel at over 2” (51 mm) per second with preset viewi ...

    Model & Doc Type: CM2C40 1

  • BLUM
    AVENTOS HF

    Lift & Flap SystemsDRAWERS, HINGES & ASSEMBLY DEVICESC.40Drawers, Hinges & Assembly DevicesCDimension data and specifications may change without notification.AVENTOS HF, HS, HL Assembly, removal and adjustment – SERVO-DRIVEDrive unit – AVENTOS HF, HS, HLSettingBefore SERVO-DRIVE for ...

    Model & Doc Type: AVENTOS HF 6

  • Peak
    409

    FOUR-POST LIFT Model:409/410/412/ 409A/410A/412A /412AX Original ...

    Model & Doc Type: 409 52

  • Vestil
    S-FORK-4-AT

    07/19/11 Rev. 3/7/2017 S-FORK-4-AT, MANUAL Copyright 2017 Vestil Manufacturing Corp Page 1 of 7 . S-FORK-4-AT HOIST HOOK FORK TRUCK ATTACHMENT INSTRUCTION MANUAL Receiving instructions: After delivery, remove the packaging from the product. Inspect ...

    Model & Doc Type: S-FORK-4-AT 7

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 R. Beck Maschinenbau
HS 300 LARGE | FH
R. Beck Maschinenbau HS 300 LARGE | FH
42 05/03
2 Tuxedo
M-1000C
Tuxedo M-1000C
7 23/12
3 Wood-mizer
E10
Wood-mizer E10
17 24/11
4 Kauber
V UltraSlim
Kauber V UltraSlim
12 30/01
5 Air Lift
RideControl 59544
Air Lift RideControl 59544
20 06/10
6 morse
400A-96SS-115
morse 400A-96SS-115
6 09/11
7 global lift corp
COMMERCIAL SERIES
global lift corp COMMERCIAL SERIES
6 09/02
8 Rotary
SPOA10NB
Rotary SPOA10NB
8 21/11
9 Dinolift
DINO 105TL
Dinolift DINO 105TL
59 14/10
10 Power Towers
830p
Power Towers 830p
24 25/12
Product Types:

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 Hunter
28480
Hunter 28480
4 11.11.2023
2 Nortel
2330
Nortel 2330
16 30.11.2023
3 Dalsa
CALIBIR 640 GigE
Dalsa CALIBIR 640 GigE
105 21.03.2024
4 Nikon
26196
Nikon 26196
2 30.01.2024
5 Easy Pix
easy-scan
Easy Pix easy-scan
2 02.04.2024
6 Stagg
250 GARH EU+UK
Stagg 250 GARH EU+UK
2 0.76 Mb 01.12.2023
7 Epson
ESC/VP21
Epson ESC/VP21
1 0.01 Mb 30.10.2023
8 RCA
24F630T
RCA 24F630T
2 0.51 Mb 25.01.2024
9 Philips
SPF2327/93
Philips SPF2327/93
2 3.87 Mb 31.10.2023
10 Dimplex
7207980300REV00
Dimplex 7207980300REV00
16 0.35 Mb 17.12.2023
Operating Impressions, Questions and Answers: