Spectracom SecureSync User Reference Manual

9, 3.1.1 The Main Screen of the Web UI 41 3.1.2 Accessing Setup Pages via the MANAGEMENT Menu 43 3.2 Default and Recommended Configurations 44 3.3 NETWORK Setup Pages 44 3.3.1 General Setup 45 3.3.2 Configuring Ethernet 46 3.3.3 Network Services: En-/Disabling 63 3.3.4 Configuring HTT…

95, 3.3.5.5 Creating Host Public/Private Key Pairs The user may create individual RSA and DSA Host Public/Private Key pairs. Host keys must first be deleted before new Host Keys can be created. To create a new set of host keys: 1. To access the SSH setup screen, choose MANAGEMENT/NETWORK/SSH Setup. T…

495, HH Hours (00-23) MM Minutes (00-59) SS Seconds (00-59) (00-60 for leap second) Q Time Sync Status [as INPUT] space = SYNC ‘.’ = SYNC ‘*’=NOT IN SYNC ‘#’ = NOT IN SYNC “?” = NOT IN SYNC Q Time Sync Status [as OUTPUT] space = Time error is less than time quality flag 1's thre…

471, CHAPTER 7 • SecureSync User Reference Guide 455 CHAPTER 7 Command-Line Interface A terminal emulation program is used to emulate a video terminal, so as to access SecureSync's CLI (Command-Line Interface) remotely via a serial cable. This may be required, if no other means of remotely acces…

23, Optional AC connection for the power input Optional DC power connector Ethernet and USB connections 1PPS output 10 MHz output Six bays for option cards One optional antenna connector. Figure 1-2: Standard rear panel Typically, option cards will be installed at the factory. Should you …

336, Spectracom SecureSync The Status window displays the following settings: (The fields viewable are contextually determ- ined according to the output mode.) Output Mode—This is a drop-down list, offering the following options: Direct Output Value—Output will be low or high determined by the output v…