SOYO 5ED5 Operation & User’s Manual

10, 6 Hardware Setup JP22: CPU Burst Mode Jumper Due to different designs, there are two kinds of CPU burst modes: Interleave Burst and Linear Burst. Select the correct mode according to the CPU you are using. CPU Burst Mode JP22 Interleave (for P54C/P55C and AMD K5/K6 CPU) 123 Linear (for Cyrix 6x8…

41, SOYO 5ED5 BIOS Setup 37 IDE HDD Auto Detection This Main Menu item automatically detects the hard disk type and configures the STANDARD CMOS SETUP accordingly. Note: This function is only valid for IDE hard disks. ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. Do you accept this…

35, BIOS Setup 31 IRQX and DMAX assigned to Choose PCI/ISA PnP or Legacy ISA. If the first item is set to Manual, you could choose IRQX and DMAX assigned to PCI/ISA PnP card or ISA card. PCI IRQ Activated By Choose Edge or Level. Most PCI trigger signals are Level. This setting must match the PCI card.…

13, Hardware Setup 9 P54C/P55C Series CPUs Settings (Continued) 12 34 56 ON External• : 60MHz Ratio• : 2.0x P54CÐ120MHz 13579 11 JP30 1357911 JP30 12 34 56 ON External• : 66MHz Ratio• : 2.0x P54CÐ133MHz (default) External• : 60MHz Ratio• : 2.5x P54CÐ150MHz External• : 66MHz Ratio•…

30, 26 BIOS Setup Spread Spectrum Modulated Choose Disabled (default) or Enabled. Select Enabled when uses Spread Spectrum Modulated 1.5% or 6% for FCC or DOC testing. 3. After you have finished with the Chipset Features Setup, press the <ESC> key and follow the screen instructions to save or di…

16, 12 Hardware Setup Memory Configuration The mainboard supports one bank of 72-pin 5V FPM/EDO/Burst EDO DRAM (SIMM), and three strips of 168-pin 3.3V/5V Unbuffered DIMM modules. The mainboard requires SIMM of at least 70ns access time. The mainboard supports SIMM bank and DIMM ban…