PT PT200M Reference Manual

54, Reference Manual Rev 1.0 Page 52 003R-618-100 12.6. Glossary Terms Term Definition Count-by The smallest change in weight units that the display can show. See also Resolution. Division A single graduation. EEPROM Electrically Erasable Programmable Read-Only Memory EMC…

37, Reference Manual Rev 1.0 003R-618-100 Page 35 • FRC.OUT (Force Outputs) Forces each of the output drivers in turn. All outputs turn OFF when leaving this step. The <EDT> key will advance through each output (ie. ON.1 and ON.2). Pressing <OK> will turn all outputs…

30, Reference Manual Rev 1.0 Page 28 003R-618-100 • CABLE (4-Wire or 6-Wire) ⊗ Sets the load cell input to operate in 4-wire (auto sense) or 6-wire mode. • Options are: 4 or 6 • Default: 6 7.4.2. OPTION (Scale Options) Items within this Group are used to configure th…

55, PT PT200M Reference Manual Rev 1.0 003R-618-100 Page 53 13. Index 4 4-Wire Connection, 8 6 6-Wire Connection, 8 A ADDRES, 33 AUT.OFF, 31 Automatic Weight Output, 40 Auxiliary Connection, 9, 40, 42 B B.LIGHT, 31, 48 Basic Operation, 16 Basic Weighing Terminology, 21 BAU…

17, Reference Manual Rev 1.0 003R-618-100 Page 15 4.2. Numeric Entry A numeric entry box allows the input of a number. When entering a number, the display will show digits with the currently selected digit flashing. The <SEL> key is pressed to select a digit to change. When …

21, Reference Manual Rev 1.0 003R-618-100 Page 19 5.6. TARE Key This key is used to temporarily set the scale to zero (such as cancelling the weight of a carton before performing a filling operation). The display will show the Net weight and the NET annunciator will be lit. The &…