Pribusin RCI-800-MDM Instruction Manual

14, ..\Manuals\RCI-800-MDM rev.C.doc Page 8 of 15 AUTODIAL The auto-dial time interval in minutes. If this parameter is set to 0 then the unit will NOT automatically initia…

3, Function: The RCI-800-MDM is a bi-directional dial-up communication system that exchanges the status of 8 dry contact inputs and 8 analog inputs between a host and remote unit or a PC equipped with a modem. A basic system consists of A) one host station and one or more remote station(s)…

16, ..\Manuals\RCI-800-MDM rev.C.doc Page 10 of 15 DI Status Dialing Determines whether or not a call will be initiated when a D igital I nput changes its status. If NO is…

8, Pribusin RCI-800-MDM ..\Manuals\RCI-800-MDM rev.C.doc Page 2 of 15 Inputs: The RCI-800 has eight dry contact inputs and eight 0-20mA inputs. The dry contact inputs are excited with 24VDC and will sou…

7, ..\Manuals\RCI-800-MDM rev.C.doc Page 1 of 15 RCI-800 Connections: The RCI-800 is the main board of an RCI-800-XXX Telemetry system. It provides the input and output signal co…

15, ..\Manuals\RCI-800-MDM rev.C.doc Page 9 of 15 CONNECT Time interval, in seconds, the calling unit stays connected before it terminates the call. While two units are connected they cont…