SONNETEER SEDLEY Instruction Manual

4, SONNETEER SEDLEY Switch Function Switch position 1 RIAA/IEC Up = IEC Warp Filter selected, Down = RIAA selected 2 MM/MC Up = MC (High Gain), Down = MM (Low Gain) 3 220pF Capacitance loading, Down = selected 4 100pF Capacitance loading, Down = selected 5 10pF Cap…

14, Technical specification Nominal Input impedance 47k  Selectable input impedance 1k  , 47  , 100  , 220  or parallel combinations of Selectable input capacitance 10pF, 47pF, 100pF, 220pF or parallel combinations of Input sensit…

7, Sedley USB installation (PC with XP installed): As the Sedley USB section is powered by the USB port, the Sedley does not need to be connected to the mains for installation or PC music playback. Installation: If your PC is not already switched on, switch on your computer. Connec…

9, LP Recorder: After installation, follow the instruction to Run LP Recorder. Click OK and OK again. On Audio Settings select as shown. Click OK. Note: With Simultaneous playback checked you can listen to the recording progress with the Record Monitor on t…

12, Optional Steps: To check if the USB Audio Codec was installed correctly: To check if the USB Audio Codec was selected by your system: Open your Device Manager: Click Start, Click Control Panel, Click System, Select Hardware tab, Click Device Manager button. Click on the…