Snorkel A38E Operator's Manual

8, Snorkel A38E Page 4 A38E Work Platform Section 1.1 Introduction & Specications DRIVE & STEER SYSTEMS The A38E Work Platform is restricted to low speed drive when the Platform is raised above the Boom Rest Limit Switch. The Traction controller controls the application of drive from the Joys…

9, Introduction & Specications Section 1.2 A38E Work Platform Page 5 1.2 Specications Table 1-1: Specications ITEM METRIC IMPERIAL (ANSI) Duty Cycle 45% of 8 hour shift 45% of 8 hour shift Platform Size 0.58 m x 1.3 m (inside gaurdrails) 1.77 ft x 4.3 ft (inside gaurdrails) Max. Platfo…

23, Operation Section 3.5 A38E Work Platform Page 19 Before operating the Emergency Lowering Valves the surrounding area should rst be cleared of any potential obstructions. It is also important that when the valve is pushed, it is initially done slowly. This is so that sudden movement …

24, Page 20 A38E Work Platform Section 3.4 Operation CONTROL FROM GROUND LEVEL 1. Chassis Controls are tted at the base of the Elevating Assembly. These should be used when no operator is in the platform (for maintenance/ service or inspection purposes), or if the operator has become inc…

18, Page 14 A38E Work Platform Section 3.3 Operation 3.2 Controls and Indicators The controls and indicators for operation of the A38E Work Platform are shown in Figures 3-1 & 3-2. The name and function of each control and indicator are listed in Tables 3-1. The index numbers in the gure corr…