Sealy Reflexion-UP Foundation Manual, Installation

1, A. B. C. E. F.D. Installation Before discarding any packing materials, check the Re exion ® -UP Foundation carton and verify the following items in the parts list are included: PARTS LIST A. Wired Remote Control – hard wired to bed (1) B. Connection Y-Cable (1) - (Only on Twin L…

2, Reflexion ® -UP Foundation STEP 1 Lift carton top off box to reveal the bottom of the foundation. STEP 2 Using a power extension cord to reach the foundation, plug in the foundation’s power cord. NOTE: Do not uncoil the foundation power cord which is packaged for shipment.…

3, Sealy Reflexion-UP Foundation Installation NOTE: Always keep the Refl exion ® -UP Foundation in a fl at, horizontal position during transportation and delivery. Always open the box in the fl at position. STEP 1 Carefully take the foundation in the carton to the bedroom and place next to where the customer wants i…

4, Reflexion ® -UP Foundation STEP 7 If this delivery involves dual foundations and/or split mattresses, see instructions for joining two foundations on page 15. STEP 8 Carefully  ip the Re exion ® -UP Foundation(s) over to the topside up position. NOTE: Make sure to lift the fo…

5, Installation Instructions For Joining Two Foundations STEP 4 Plug in the “A” output of the Y-Cable into FrameA control port. STEP 5 Plug in the “B” output of the Y-Cable into FrameB control port. STEP 6 Plug one of the provided Wired Remote Controls into the “Control I…