VSCOM NetCom Plus 113 Operation & User’s Manual

115, 10 OpenVPN™ Encryption 4. Call the commands vars.bat, clean-all and build-ca in this order. You could press enter for all the values for which you will be asked, except the Common Name, which should be the name of your VPN (eg. MyVPN). 5. The next command build-key-server server will generate a c…

37, 4 Windows Virtual COM Driver Figure 30: NetCom + in Device Manager In the Device Manager the serial ports are listed in the usual section Ports. Additionally there is the device class Multi-port serial adapters. All installed NetCom + Devices are listed herein. The available options are de…

125, VSCOM NetCom Plus 113 13 TCP/IP Description 13 TCP/IP Description TCP/IP is the protocol used on the Internet, and in local networks as well. This opens access to any device connected somewhere to the Internet. But a simple contact like plugging in a cable is not enough. The network has to be configured. Your ne…

99, 8 IP Modem Function 8.4.1.3 Non-AT commands All these commands apply in Command Mode. If a Dial command or an ATA succeeds with a CONNECT, the IP Modem is in data mode. Every data received on the serial port is sent to the other station/IP Modem. And there is a special character sequence in Data …

97, 8 IP Modem Function The recommended cable connects as shown in this table. Please note, this installation does not use the simply crossed signals. Especially the DSR of the PC is internally connected to the DTR of the PC. DB9m PC IP-Modem DB9m DB9f 3 TxD —— RxD 2 3 2 RxD —— TxD …

69, 6 Configure the Operation Modes Even non-technical users can process and manage the viaVPN solution with just a few mouse-clicks, which lets you build up your cloud-based support team without incurring elevated costs or long waiting times. ServerConfig +--------------------+ | Paramete…