Specifications:854/854932-bc1200.pdf file (11 Aug 2023)
|
SIGMA SPORT BC 1200 Bicycle Accessories, Other PDF Manual (Updated: Friday 11th of August 2023 08:16:00 AM)
Rating: 4.5 (rated by 50 users)
Compatible devices: BC 301, INLINE SPEED CHIP, BC 700, PC 800, BC 800 - AUTRE, Topline BC 1909 HR, Buster 2000, BC 1009 sts.
Recommended Documentation:
BC1200 SIGMA SPORT BICYCLE COMPUTER RESET/SET = BIKE 1 DISTANCE/DAY RIDE TIME AVERAGE SPEED STOPWATCH MAX SPEED STPWATCH TRIP UP/-DOWN TOTALODO CLOCK = BIKE 2 The BC1200 is set up to switch back and forth between 2 bicycles. Please make sure the correct bicycle is showing before you begin your ride. I. TO SET CLOCK • Press bottom button until clock appears at the bottom of the screen. • Turn computer over and press and hold the right indented gray set button • (S) for 5 seconds or until clock flashes. • Press top button until hour is reached. • Press bottom button to move to minutes. • Press top button until desired number is reached. • Press bottom button to move to single minutes. • Press top button until desired single minute is reached. • Turn computer over and press right indented gray set button (S) for 1 second to set. II. TO SET MPH/KMH, LANGUAGE, AND WHEEL SIZE 1 • Make sure computer is on BIKE 1. • Press bottom button until CLOCK or TOTALODO is not displaying on screen. • Turn computer over and press and hold the indented gray set button for 5 seconds or set language flashes. • Press top button to switch select: Deutsch(German), English, Francais(French), Italiano(Italian), Espanol(Spanish), Svensk(Swedish), or Hollands. • Press bottom button to accept & select KMH/MPH. • Press top button until your selection is reached. • Press bottom button to select & move to wheel size. • (Consult chart or figure yourself by measuring from the top of the tire to the ground in inches.) Measurement X 25.4 x 3.14 / 1.61 = ws ( / is divided by) • Press top button to advance numbers. • Press bottom button to make 2nd digit flash. • Press top button to advance numbers. • Press bottom button to make 3rd digit flash. • Press top button to advance numbers. • Press bottom button to make 4th digit flash. • Press top button to advance numbers. • Press indented right set button on back for one second to store. III. TO SET WHEEL SIZE 2 • Press gray indented l / ll button on back to switch to bike 2. • Press bottom button until CLOCK or TOTALODO is not displaying on screen. • Press and hold gray indented set button on back for 5 seconds to make ll and first number flash. • Press top button to advance numbers. • Press bottom button to make 2nd digit flash. • Press top button to advance numbers. • Press bottom button to make 3rd digit flash. • Press top button to advance numbers. • Press bottom button to make 4th digit flash. • Press top button to advance numbers. • Press indented gray set button on back for one second to store. IV. TO SET TOTALODO (ONLY IF YOU WOULD LIKE TO PROGRAM MILES PREVIOUSLY RIDDEN) • Press bottom button until TOTALODO is showing.(This will program miles previously ridden.) • Press gray indented set button on back for 5 seconds to make flash. • Press top button to advance numbers and bottom button to move to the next number. • Press indented gray set button for 1 second to store. V. TRIP COUNTER (MOSER GUIDE) TRIP UP – (to count up as normal) • Press bottom button until TRIP UP or TRIPDOWN appears. • Press top and bottom buttons simultaneously, then release. SET will flash. • Press top button to set TRIPUP. • Press bottom button to select with first number flashing. • Press top button to advance numbers & bottom button to move to next flashing number. • Press top and bottom buttons simultaneously to lock in. VI. TRIP COUNTER (MOSER GUIDE) TRIP DOWN – (to count down to destination) • Press bottom button until TRIP UP or TRIPDOWN appears. • Press top and bottom buttons simultaneously, then release. SET will flash. • Press top button to set TRIPDOWN. • Press bottom button to select with first number flashing. • Press top button to advance numbers & bottom button to move to next flashing number. • Press top and bottom buttons simultaneously to lock in. VII. VI To Reset modes DIST/DAY, RIDETIME, AVGSPEED, MAXSPEED, or STPWATCH individually, press bottom button until desired mode is reached. Press the top left button for 2 seconds to reset to zero. Continue to hold top left button to reset all. DIST/DAY – Will record distance traveled. Reset by pressing top button until RESET DIST/DAY stops flashing. (automatically resets after 999.99 miles) RIDETIME – Auto start/stop stopwatch that shows actual time ridden. AVGSPEED – Shows average speed only when moving. It will continue with previous numbers until reset. Can be reset by pressing top button until RESET AVGSPEED stops flashing. ↑ Above average speed during the ride. • Riding at average speed during the ride. ↓ Below average speed during the ride. STPWATCH – Stopwatch function can be controlled by pressing top button to start. Press again to stop. Press top button and hold until RESET STPWATCH stops flashing to reset to zero. MAXSPEED – Maximum speed reached while riding. Can be reset by pressing top button until RESET MAXSPEED stops flashing. CLOCK – Current time. TOTALODO – Total distance for bike 1 and bike 2 combined .(automatically resets after 99999 miles)
Phonic Guide Music Mixer POWERPOD 1860 II (#2G14AR)
POWERPOD 1860 II, 16, phonic/powerpod-1860-ii.pdf
#MI1344: DWA-520 Instruction
DWA-520, 24, d-link/dwa-520.pdf
#Z9YB1U: PLC- WL2503 User Manual
PLC- WL2503, 78, sanyo/plc-wl2503.pdf
Sony Tutorial: KD-34XBR2 - 34" Hdtv Fd Trinitron Wega (#963TM9)
KD-34XBR2 - 34" Hdtv Fd Trinitron Wega, 47, sony/kd-34xbr2-34-hdtv-fd-trinitron-wega.pdf
CD Player SCD-3700 Instruction, #3X7826
SCD-3700, 5, soundmaster/scd-3700.pdf
#GW86R8: Cleanaire Handbook
Cleanaire, 4, adams/cleanaire.pdf
Palsonic Tutorial: 7610WSPF (#OKVL12)
7610WSPF, 33, palsonic/7610wspf.pdf
#W455SJ: T50 Reference Book
T50, 32, bostitch/t50.pdf
Calculator PLATON XL Instruction, #254R58
PLATON XL, 24, caretec/platon-xl.pdf
2036 Power Supply - #H1T2W1
2036, 16, patton-electronics/2036.pdf
INSTRUCTION MANUALARM REST KIT V2www.ridefarr.com TOOLS REQUIRED:• 1 X T25 KEY • 1 X 5mm ALLEN KEYARM REST KIT V2ASSEMBLY DIAGRAMIMPORTANT NOTICE :CLAMP BOLTS FROM THE AERO BOLT-ON MUST BE REPLACED WITH T25 M5 X 16mm BOLTS SUPPLIED.DISCLAIMER : INCORRECT ASSEMBLY AND/OR USE ...
Model & Doc Type: Arm Rest Kit V2 2
ͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺ&d^>ϳϬϯ /'Π^ƚĂŶĚĂƌĚKƉĞƌĂƚŝŶŐWƌŽĐĞĚƵƌĞͮƌĞůĞĂ� ...
Model & Doc Type: CBC 17
1x Schraubensatz:1x Screw kit:4 allen screw M6 x122 countersunk screw M8 x 602 countersunk screw M8 x 352 allen screw M6 x 202 allen screw M6 x 164 washer ø6,42 self-lock nut M62 special washer 20 x 20 x ø6,44 Zylinderschraube M6 x122 Senkschraube M8 x 602 Senkschraube M8 x 352 Zylinderschraube ...
Model & Doc Type: Easyrack 4
WARRANTYCane Creek Cycling Components warrants its bicycle products for a period of 2 years from the original date of purchase. Any product that is found to be defective in materials or workmanship will be repaired or replaced at the discretion of Cane Creek. This warranty applies to ...
Model & Doc Type: 100 Classic 2
# | Brand | Model | Document Type/File | Pages | File Size | Last Checked |
---|---|---|---|---|---|---|
1 | Widek | Qibbel Air |
8 | 11/01 | ||
2 | BIKE AHEAD COMPOSITES | THE FLATBAR |
10 | 17/02 | ||
3 | 4iiii | precision pro |
34 | 27/01 | ||
4 | Cateye | TOMO XC |
2 | 13/12 | ||
5 | Ourmeter | LCD-S700 |
29 | 25/11 | ||
6 | Thule | 938 |
6 | 0.4 Mb | 18/11 | |
7 | Storage Options | bike Cam |
8 | 08/03 | ||
8 | Bosch | BDU330 |
41 | 26/09 | ||
9 | Cobra | 602-2004 |
4 | 31/12 | ||
10 | Burley | DASH FM |
84 | 03/10 |
# | Brand | Model | Document (PDF) | Pages | Size | Check Date |
---|---|---|---|---|---|---|
1 | CODELOCKS | CL4510 |
26 | 19.10.2023 | ||
2 | Yeti Cycles | ASRC 08 |
15 | 27.12.2023 | ||
3 | HAGER WERKEN | SPEED LABOLIGHT |
28 | 13.09.2023 | ||
4 | Drive | FC 2000 |
2 | 25.02.2024 | ||
5 | Marley Engineered Products | SERIES 500 |
7 | 20.03.2024 | ||
6 | Barazza | SPACE 1PIDS80N |
48 | 27.02.2024 | ||
7 | HP | Z27i |
9 | 30.01.2024 | ||
8 | Lasonic | MSU-2020 |
24 | 18.09.2023 | ||
9 | Hilti | PMP 45 |
111 | 20.11.2023 | ||
10 | YASKAWA | JEPMC-OP3C01-E |
42 | 05.03.2024 |