Yealink T54S Administrator's Manual

590, Troubleshooting 570 Topics Capturing the Packets in Normal Way Capturing the Packets in Enhanced Way Capturing the Packets in Normal Way Procedure 1. From the web user interface, navigate to Settings->Configuration. 2. Select Normal from the pull-down list of Pcap Type. 3…

30, Yealink T54S Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones 10 Port->IPv4->DHCP IPv4 Client->Static DNS (Enabled) ->Pri.DNS Parameter static.network.secondary_dns [1] <y0000000000xx>.cfg Description It configures the secondary IPv4 DNS server. E…

485, Advanced Features 465 Permitted Values String Default Blank BLF Key LED/Icon and Behavior for Talking State Configuration The following table lists the parameters you can use to configure BLF key LED/icon and Behavior for talking state (the monitored user is talking). …

47, Phone Network 27 Description It enables or disables the Wi-Fi feature. Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones. Permitted Values 0-Disabled 1-Enabled Default 1 Parameter static.network.redundancy.mode [1] …

317, Call Features 297 “dialplan.emergency.asserted_id_source” is not set to HELD. Permitted Values a combination of digits 1, 2 and 3 Default 1, 2, 3 Parameter dialplan.emergency.held.server_url <y0000000000xx>.cfg Description It configures the Location Informati…

274, Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones 254 Permitted Values String Default Blank Parameter static.auto_provision.custom.upload_method [1] <y0000000000xx>.cfg Description It configures the way the IP phone uploads the <MAC>-local.…