ZALMAN ZM-RSSC V2 Operation & User’s Manual

11, If you want to listen to DVD 5.1 channel sound using this sound card, additional settings are required on the DVD player software. 1) Audio Output Right click > ‘configuration’ > ‘Audio’ tab > Audio Output’ - Select “6 Speaker”. The Power DVD software, which comes bundled …

6, Connect the headphones' USB Connector to the PC's USB port. The OS will automatically detect the headphones, and the "Found New Hardware" message will pop up. ※This product could generate a slight pop-up noise during connection to or removal from one of the PC’s USB …

12, 2) Miscellaneous Settings Click the Sound Card's icon in the Windows System Tray to open the sound card's control panel. Go to Settings > Audio > Advanced > Miscellaneous. ※Recommended DVD Player Software: Power DVD 4.0 or WinDVD 4.0 If you are not satisfied w…

2, Please read these "Safety Notes" carefully before using the product. After reading, please keep this manual in a safe place. The following marks indicate proper use of the product, and how to avoid injury to yourself or the product. Please understand the meaning of each mark be…

8, ‘Mixer’ Tab Vol: Adjusts the volume level and balance regarding the audio input source. Select 'Microphone' and 'Line In' to disable them (This product does not have MIC and line input terminals. Therefore, the features mentioned above should be muted). There are two …