Seeley MagIQtouch Installation Manual

23, MAGIQTOUCH CONTROLLER INSTALLATION MANUAL | 21 ILL1635-B ILL1634-C REPLACING COMPONENTS When a component is disconnected the MagIQtouch Controller will display a warning message. MANAGING COMPONENTS cont When a new replacement component is connected and powered up, the controller w…

14, 12 | ILL1616-C ILL1617-C OPERATION SCREENS cont Adjust Fan speed and over ride thermostatic “temperature” Control: Choose between TEMP or SPEED control (Evap coolers only) ILL2405-A For detailed information on the operation screens refer to the MagIQtouch Controller Owner’s …

8, 6 | Draw the cable through the wall cavity to the hole made at the wall bracket. Connect the cable to the wall control and mount the wall control onto its bracket. Important! Take care not to damage the cable or plug during this process. Important! Drafts within the wall cavi…

12, 10 | CONNECTING THE MAGIQTOUCH CONTROLLER cont ILL2404-A The MagIQtouch Controller uses a ‘System Installation Wizard’ to assist with the installation process. Note! It is important that evap coolers are connected ONE AT A TIME as prompted by the MagIQtouch Controller. If more than …

16, 14 | ILL1599-C ILL1621-C ILL1622-A SETTINGS MENU cont Current status on right side of screen. To change a setting or access menu item, press arrow. If a menu item is locked to discourage customer access the pin code is 7378. …

13, Seeley MagIQtouch MAGIQTOUCH CONTROLLER INSTALLATION MANUAL | 11 ILL1613-C ILL1614-C ILL1615-C OPERATION SCREENS Select primary mode (COOL/HEAT/FAN ONLY): Turn system on & o: Adjust temperature: …