Xantech XT-DL-IRK Installation Manual

4, 4 REMOTE ROOM APPLICATION One application is to locate the IR receiver in a remote room. This will give the end-user the ability to control audio/video equipment from a location where the remote control no longer has the ability of direct line-of-sight. The IR receiver will need the 3.5mm …

7, 7 DINKY-LINK (DL) IR RECEIVER KIT DESCRIPTION The DL Series Kit comes with everything needed for a complete IR repeater system. With a Xantech IR Kit, equipment can now be concealed for clean room design. In addition, a centralized IR receiver means there is only one IR target resulting in impr…

6, 6 LOCAL SYSTEM APPLICATION Another application is to locate the IR receiver in a central location, such as the TV, video screen and/or a speaker. The audio/video equipment can then be hidden inside a cabinet or located away from the front of a room. This will give the end user the abil…

2, Xantech XT-DL-IRK 2 DESCRIPTION These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. – anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement…

9, 9 STEP 3: Plug in the 283D/286D Designer Emitters 3.5mm mono mini plugs (ITEM C/D) into the jacks labeled EMITTERS on the 789-44 (ITEM B) and aix the opposite end to the IR Sensor Window of the controlled equipment. Extra double sided adhesive tape is included. The YELLOW con…

14, 14 Symptom #6: Emitters function but some (or all) components do not respond. Cause Solution 1. Emitter placement is incorrect. Reposition the Emitter so that it is directly over the components sensor window. Consult the components owners’ manual of the unit for the exact location of the I…