Seiko RP-E10 Series Operation Manual

106, 6-6 6.4 How to Add a New Paper Size This section shows an example of the procedure to add a user defined paper size. 1. Select the [Forms] tab in the [Print Server Properties] window. 2. Select the [Create a new form] check box. 3. Enter the paper name in the [Form name] field.…

107, 7-1 Chapter 7 Font 7.1 Overview This chapter describes the font printing function. The following types of font can be handled by the printer driver. ·TrueType Font :Font installed in Windows. ·Device Font :Font installed in a printer. ·Barcode Font :Special font to print the…

61, 4-4 4.4 Port Sets output ports. 4.4.1 Displaying [Ports] Window Select the [Ports] tab to display the window below. Screen 4-3 [Ports] window  A shared printer may not work properly depending on the network usage. Caution …

82, 5-19 *1: When you select a string, barcode, or custom command in [Command List] by double clicking it or using the spacebar, the selected string or data is entered in the corresponding edit box. *2: Not available when [Command L ist] is blank. *3: If you add or delete a command in [Com…

54, 3-32 Item Description (" ": Initial Value) Settings Sets parameters about the watermark. Image Sets the type of the image used as the watermark. * 1 ·None ·NV Image Keycode Enters the keycode of the image used as the watermark. * 2 ·00 to 99 Position Selects t…

7, Seiko RP-E10 Series Introduction - 5 Root folder The "Root folder" described in this document means one of the following folders. Windows XP <Drive on which Windows is installed>:\Documents and Settings\<User name>\My Documents\<Friendly name (SII RP-E10 etc.)>\ For Windows Vista …