Synway Syn_PBX80 U20V2 Operation & User’s Manual

89, Copyright ©Synway All Rights Reserved 88 / 132 V2.1.2 You can click “Edit” button to edit one of the items, or you can delete the item by clicking the “Delete” button. Click the “Routing Table” tab and you’ll see a detailed list of all the system routing rules, inc…

70, Synway Syn_PBX80 U20V2 Copyright ©Synway All Rights Reserved 69 / 132 V2.1.2 4.9 Call Transfer Call Transfer is used to transfer a call in progress to some other destination. There are two types of call transfer.  Attended call transfer - Where the call is placed on hold, a call is placed to anothe…

78, Copyright ©Synway All Rights Reserved 77 / 132 V2.1.2 this is a dynamic effective feature and is only designed to handle callbacks made within the same day as the original call. 2. In the “Pattern” field, patterns can be used in the same way as the patterns used to manipulate dialed n…

124, Copyright ©Synway All Rights Reserved 123 / 132 V2.1.2 so the option to reverse this behavior is provided.  Advanced Protocol File: Additional configurations for R2 signaling.  Category: Send calling party’s category. Usually National Subscriber works just fine, you can …

121, Copyright ©Synway All Rights Reserved 120 / 132 V2.1.2 T1 runs on same signaling types as E1 mode except R2. And T1 uses different Framing and Coding methods, configure these parameters according to the details provided by the telephony provider. In most cases CRC4 is not needed f…