Synapse SNAPconnect E12 Operation & User’s Manual

23, Synapse SNAPconnect E12 provide at runlevel 3). This is important because it affects where you should add your run-once scripts to have them execute. There is a Bash script located at /etc/rc.local that executes every time the runlevel changes to a new multiuser level. In normal operation, the E12 boots to…

15, E12 Physical Interfaces The E12 includes a tri-color LED that you can control from your programs, plus a button you can monitor. Control scripts in the E12-led and E12-button packages assist with controlling the LED and monitoring the button. E12 LEDs The four processor-controlled LEDs are singl…

3, Table of Contents Overview 1 The Device 2 Getting Started 3 Powering the E12 3 Establishing a Serial Connection 3 Mounting the E12 8 E12 Software Specifics 9 Passwords and root Access 9 E12-Specific Software Packages 9 E12 Physical Interfaces 11 E12 LEDs 11 The SNAPModule-Controlled LED 11 The E…

6, 2 SNAPconnect E12 User Guide — 116-081614-030-B001 The Device The images below show an E12 gateway with all features marked: All E12s include a SNAP-powered module, and will come with an antenna for the module's connection labeled with the Synapse S on the E12's case. …

28, 24 SNAPconnect E12 User Guide — 116-081614-030-B001 Factory Restore / Re-Flashing Your E12 From time to time you may need to restore an E12 to the factory default state. The instructions below will help you do that. Restoring from a MicroSD Card l Download the newest microSD card E12 inst…