Promag Mifare DESFire Operation & User’s Manual

30, PROMAG DF7XX REV.C 30 ANNEX J. History Rev A: February 12, 2009 Issue DF7XX Reader. Rev B: October 29, 2009 Fix power supply 7.5V~24VDC Rev C: November 30, 2011 (Kylie) Update Mifare Reader Utility Pics. Modify Reader ID to 0~63. Add “Source Data Order…

13, PROMAG DF7XX REV.C 13 5. Wiegand Setting Include Reader ID is to set the Wiegand output data to include Reader ID when it is enabled. (Default=Disable). Custom Premable is to set the Wiegand output data to include premable code when it is enabled. This code onl…

22, PROMAG DF7XX REV.C 22 ANNEX D. RS232 Interface Connect the RS232 wires, example as below: HOST/Terminal Optional: External LED/Buzzer Control (Brown) (Red) GND (Black) DF700 7.5~24VDC GND GND TXD (Yellow) …

17, PROMAG DF7XX REV.C 17 8. Configured Card Configured Card Enabled can allow your reader change configuration by Mifare ® Card. Key is the Mifare ® Key A for allowed configured card. …

9, PROMAG DF7XX REV.C 9 Non-MAD Sector: (Default =0) When the card is Non-MAD format, DF7XX reader will only read the “Non-MAD Sector”. (1K Card Sector: 0~15, 4K Card Sector: 0~39). For the Non-MAD application, user can freely define the Sector. App Key (KEY_A): (Default=FFFFFF…

12, Promag Mifare DESFire PROMAG DF7XX REV.C 12 Enable Two Wires Control LED / Disabled ABA-TK2: (For 19200,n,8,1 only) set up the "Brown Wire Active Level", and Brown wire and Orange wire will follow the setting. Example: "Brown Wire Active Level"=High; Green light on with a beep whe…