Projecta HDBM4000 Instruction Manual

5, 5 AUTO/MANUAL ADJUSTABLE OUTPUT Manually or use the Automatic charge setting feature to adjust the rate of charge to best suit different battery sizes. MULTI VOLTAGE OPERATION Suitable for charging 6V, 12V & 24V batteries. SHORT CIRCUIT & POLARITY PROTECTION POWER SUP…

28, Distributed by AUSTRALIA Brown & Watson International Pty Ltd Knoxfield, Victoria 3180 Telephone (03) 9730 6000 Facsimile (03) 9730 6050 National Toll Free 1800 113 443 NEW ZEALAND Narva New Zealand Ltd 22–24 Olive Road PO Box 12556 Penrose Auckland, New Zealand Telephone (09) 525 457…

24, 24 Customising VOLTAGE and CURRENT VOLTAGE – press and hold simultaneously the “BATTERY VOLTAGE” (fig.A.21) and “MODE” buttons (fig. A.22) for 3 seconds – use the same buttons to select (decrease using the “BATTERY VOLTAGE” button and increase using the “MODE” bu…

8, 8 11. Choice of the battery production technology: WET: lead-acid batteries with liquid electrolyte; GEL: lead-acid batteries, sealed, with solid electrolyte; AGM: lead-acid batteries, sealed, with electrolyte on absorbent material; PbCa: lead-calcium batteries. 12. …

13, Projecta HDBM4000 13 c) CUSTOMISED PULSE-TRONIC It is possible to select: – the battery construction technology (fig. A.11)choosing between:“WET, GEL, AGM, PbCa” – the charge current (fig.A.6) choosing between:“AUTO” - automatic setting according to battery condition…

11, 11 a. Make sure the level of electrolyte covers the battery plates; if they are not covered, add distilled water until they are submerged by 5–10 mm. ATTENTION! BE VERY CAREFUL WHILE CARRYING OUT THIS OPERATION BECAUSE THE ELECTROLYTE IS AN EXTREMELY CORROSIVE ACID. …