PORTMAN GT2000 Operation Manual

11, 10 To determine whether GT-2000 is moving or not, user can select the sensitivity of the “acceleration sensor”. It is distinguished by the tilt angle of the device. If the unit tilted more than the degree set here, GT-2000 will be in moving mode. Otherwise, it will be in stop mode. …

3, PORTMAN GT2000 2 Call Monitoring: user can send a SMS that included the preset password of the unit. GT-2000 will send “PASS” SMS ACK back, unit will auto answer the phone in the following 5 minutes. Using built-in real time clock to identify the report time, when GPS signal is lost. Hence, if the r…

7, 6 C. MAIN INTERFACE 1.[User detail]: If the SIM card is password protected, user can input the “SIM PIN” window to set password of SIM Card. Set UNIT ID and UNIT password of for the device. Set Access Point Name (APN), User Name, Password. The maximum length of the APN…

13, 12 6-2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen…

12, 11 IO Connection Four Button One Power button, 3 speed dialing buttons 1 volume adjust button Communication GPRS \SMS\RS232\ Environmental Operating Temperature -20°C to +55°C Storage Temperature -40°C to +85°C Accessories 1. Internal battery 2. PC setup cab…