SonicWALL PRO 200 Installation Manual

45, Page 44 Basic Network Terminology and Configurations The above diagram depicts a simple home network solution with the SonicWALL Internet Security appliance. Note:The WAN IP address is an example of an IP address and does not reflect the actual IP address supplied by your ISP. Basic N…

35, Page 34 5. Select Provided you with desktop software, a user name and password (PPPoE), if your ISP has provided you with desktop software, a user name and password information. Setting the User Name and Password for PPPoE 6. If you select Provided you with desktop software, a u…

69, Page 68 There are three Ethernet ports; one for each of the LAN, DMZ, and WAN ports: • Link Lights up when a Twisted Pair connection is made to another Ethernet device (usually a hub) on the port. Note that the device connected to the SonicWALL must support the standard Link Integrity t…

12, SonicWALL PRO 200 SonicWALL Installation Guide Page 11 Logging into the SonicWALL Now that you have changed the IP address of your computer, you need to log into the SonicWALL to begin the configuration. Type 192.168.168.168 into the Location or Address field at the top of your browser and press Enter …

77, Page 76 There are two power input receptacles to connect the SonicWALL to the AC power input. The unit comes standard with redundant hot swappable power supplies with active power function correction (100-240 VAC 50/60 Hz). • Power Switches One power switch for each hot swappable power …