Sonel MRU-30 Operation Manual

5, MRU-30 OPERATING MANUAL version 1.03 3 TABLE OF CONTENTS 1 SAFETY ................................................................................................................... 5 2 TURNING THE METER ON AND ACTIVATING SCREEN BACKLIT. ....... 6 3 METER CONFIGURATION ............…

13, MRU-30 OPERATING MANUAL version 1.03 11 After finishing the measurment, read out the result. The results of all the measurements that have been carried out will be displayed on screen. The result is displayed for 20 s. It may be displayed again when ENTER is pressed.…

8, Sonel MRU-30 MRU-30 OPERATING MANUAL version 1.03 6 2 Turning the meter ON and activating screen backlit. Turn on the meter with button. Short press button to turn the screen backlight on; press the button again to turn the backlight off. Switch o…

42, MRU-30 OPERATING MANUAL version 1.03 40 7 Firmware update In accordance with the guidelines of Section 3 of this manual, enter the meter’s firmware update mode: UPdT Connect the cable to the USB port of the computer and the USB socket of the meter. …

9, MRU-30 OPERATING MANUAL version 1.03 7 Use and buttons to turn the audio messages ON ( ) or OFF ( ). Press and to switch to auto off set- ting screen (Auto-OFF): oFF Use and to set the time period af- ter which the meter …

7, MRU-30 OPERATING MANUAL version 1.03 5 1 Safety The MRU-30 meter has been designed to carry out measurements which results determine the safety conditions of the installation. Therefore, in order to provide conditions for correct operation and the correctness of the obtain…