Smithco Spray Star 1006 Operator's Manual

18, 16 Operation SPEED SENSOR CALIBRATION Default = 250 pulses/ 300 ft The speed sensor needs to calibrated in order to provide the proper speed reading. The value for this step is the number of pulses generated by the speed sensor in 300 feet. AUTO CALIBRATION The speed sensor can be automatically ca…

40, Smithco Spray Star 1006 38 Nozzle Charts NOZZLE PERFORMANCE CHART #7 SMITHCO NOZZLE PERFORMANCE CHART #1 Nozzle Type: Turbo Floodjet Spacing: 30 inch (76cm) Calibration: US Gal/Acre (GPA) & US Gal/1,000 Square Feet (GPT) Pressure Nozzle Capacity Application Rate GPA Speed MPH (KPH) Application Rate GPT Speed MPH (KPH)…

39, 37 Nozzle Charts NOZZLE PERFORMANCE CHART #6 SMITHCO NOZZLE PERFORMANCE CHART #1 Nozzle Type: Raindrop 1/4" Spacing: 20 inch (51cm) Calibration: Liters Per Hectare Pressure Nozzle Capacity Application Rate LPH Speed KPH (MPH) Color Size psi (bar) (L/Min) 3 (2) 5 (3) 6 (4) 8 (5) Grey RA-2 …

21, 19 Operation TIP SELECTION DISPLAY This display is the tip selection display. On the display the two last digits of the VisoFlo ® color coded tip are shown, e.g. an XR11004 corresponds with _04. (see Table Below) The last selection _P is a programmable selection in case the tips being used do not …

11, 9 Introduction CONTROLS & INSTRUMENTS (CONTINUED) I. Spray Boss Control - Engages and disengages speed boss. Forward is engage and all the way back is disengage. When the lever is engaged it sets a stop for the accelerator. The accelerator pedal must be used to maintain this speed.…

1, OPERATOR’S MANUAL Spray Star 1000 Model 1006 Requires 10-160 Boom Starting Serial #100100 January, 1999 SMITHCO PRODUCT SUPPORT 1-800-891-9435 Hwy SS and Poplar Avenue, Cameron WI 54822 E-mail: [email protected] …