Smith-Root PES Operation & User’s Manual

5, USER’S GUIDE 3 2015 DEVICE ON/OFF (A) The large red button located on the left side of the front panel turns the device on and off. For on, twist the button to the right. Press the button to turn the unit off. The battery charger must be disconnected from the PES ® prior to turning th…

18, PES: PORTABLE ELECTROANESTHESIA SYSTEM 16www.smith-root.com SYSTEM MENUS PRE-PROGRAMMED DOSES SETTING 0: Ramped-DC 100 VOLTS With the activation of the remote switch the unit outputs a low voltage that raises to 100 volts in 1 second and stays at that level until the remote switc…

20, Smith-Root PES PES: PORTABLE ELECTROANESTHESIA SYSTEM 18www.smith-root.com SPECIFICATIONS PES ® SPECIFICATIONS Conductivity Range: 100 to 1500 microsiemens Input Voltage: 25.9VDC Nominal Input Current: 20 Amps Max. Input Monitoring: Input voltage and current plus fuel gauge type display for battery …

14, PES: PORTABLE ELECTROANESTHESIA SYSTEM 12www.smith-root.com Note: For dual waveform output to function the Dual mode setting must be enabled and the Primary Wave Timer must not be disabled. The PES ® switches from the Primary waveform to the secondary waveform when the Primar…

19, USER’S GUIDE 17 2015 SAFETY CHECKLIST: Before operating unit, make sure that: • At least 2 PEOPLE on the crew know how to administer first aid for electric shock. • Unit is clean and dry. • All cables are in good condition, with no cracks or abrasions and that all connectors ar…