SMART-AVI HDR-8X8-XT Operation & User’s Manual

9, SMART-AVI HDR-8X8-XT 9 CONTROL VIA ETHERNET HDR-8X8-XT TCP/IP control is a feature that allows source / display switching, EDID configuration and Network settings to be controlled remotely via HTTP. Manage your HDR-8X8-XT with ease from anywhere in the world. Make sure the HDR-8X8-XT RJ45 PC Control p…

3, 3 INTRODUCTION The HDR-8x8-XT with simultaneous CAT5e/6/7 and HDMI outputs connects eight HDMI input sources to sixteen displays. This matrix features eight mirrored HDMI outputs, providing 8 HDMI output ports and 8 CAT-Cable output ports simultaneously. The HDR-8x8-XT supports …

15, 15 NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no war- ranty of any kind with regard to this material, including but not limited to, implied warranties of merchant- ability and fitness for particular purpose. SmartAVI will not be liable…

4, 4 TECHNICAL SPECIFICATIONS VIDEO HDMI Format HDMI 1.4, HDMI2.0, HDCP 2.2 and DVI1.0 compliant Video Bandwidth 297MHz[10.2Gbps] Input Resolution Up to 4K (3840x2160 @ 30Hz) Output Resolution Up to 4K (3840x2160 @ 30Hz) HDMI Connector Type A 19 pin female RJ-45 Conn…

7, 7 REAR PANEL Figure 7-1 1. GND: Connect the Housing to ground. 2. IR Matrix IR EXT: If the panel sensor is obstructed or the unit is installed in a closed area out of infrared line of sight, an IR RX receiver (EYE) can be inserted into the IR EXT port at the rear to extend the I…