TCS 682-15 Service Manual

7, KEY FEATURES OF 682 METER TYPICAL ACCURACY CURVE 32 SSU SOLVENT -0.2 -0.1 0 0.1 0.2 0 5 10 15 20 25 30 35 40 GALLONS PER MINUTE % DEVIATION The 682 meter's linear accuracy (percent of error over or under the zero - error level) remains within design parameters (+/- 0.2%) ov…

13, METER ASSEMBLY 682-15 ITEM# MFG DESCRIPTION QTY SP AF SS 1 TCS Screw, 3/8-16 X 1-1/8 1 297-050361 297-050361 1-126333 2 TCS Washer, 3/8 Split Lock 1 15-050641 15-050641 1-126334 3 TCS Counter Support 1 1-312518 1-312518 1-312518 4 TCS Roll Pin 1 …

23, TCS 682-15 682 METER EXCLUSIVE LIMITED WARRANTY WARRANTY New 682 piston meters manufactured by Total Control Systems, a division of Murray Equipment, Inc. ("TCS") with which this warranty is enclosed, are warranted by TCS to the original purchaser only for a period of ten (10) years from …

2, SPECIFICATIONS Type Reciprocating 3 Piston Positive Displacement Connections 1-1/2” companion flange Flow Rate Minimum: 0.2 GPM (0.76 LPM) Maximum: 40 GPM (151 LPM) Working Pressure 150 PSI maximum (10.5 Bar) Working Model 682SP: -20°F to 200°F (-28.9°C…

1, TOTAL CONTROL SYSTEMS 2515 Charleston Place • Fort Wayne, IN 46808 (800) 348-4753 • (260) 484-0382 • Fax (260) 484-9230 [email protected] • www.tcsmeters.com “The Standard of Measurement” 682-15 Piston Flow Meter SERVICE MANUAL …

16, COMPENSATOR SHAFT SEAL KIT INSTRUCTIONS 1) Remove screws that bolt the meter cover assembly to the meter body. Loosen and remove the entire meter cover assembly. 2) Cut seal wire and remove seal pin from index disc. 3) Unscrew hex nut from the compensator shaft. Remove c…