Nexgrill 720-0419 Manual, Assembly & Operating Instructions

19, Nexgrill 720-0419 LEAK TESTING Only those parts recommended by the manufacturer should be used on the grill. Substitution will void the warranty. Do not use the grill until all connections have been checked and do not leak. GAS FLOW CHECK Each grill burner is tested and adjusted at the factory p…

22, OPERATING INSTRUCTIONS CAUTION: PLEASE TAKE OFF THE WARMING RACK WHEN USING THE ROTIS BURNER. THE HIGH HEAT COMING FROM THE ROTIS BURNER MAY CAUSE THE WARMING RACK TO BEND. 19 GRILL LIGHTING INSTRUCTIONS WARNING: IMPORTANT! BEFORE LIGHTING… Inspect the gas supply hose prior t…

15, ASSEMBLY INSTRUCTIONS STEP 15: Attach propane gas tank to regulator inlet fitting by turning the regulator clockwise as shown in figure below. LP gas cylinder must be fitted with a listed overfill prevention device (OPD). Secure liquid propone gas cylinder to the slide out tray usin…

18, GAS HOOK-UP 5. When connecting regulator assembly to the valve, hand tighten the quick coupling nut clockwise to a complete stop. Do not use a wrench to tighten. Use of a wrench may damage the quick coupling nut and result in a hazardous condition. 6. Open the tank valve ful…

7, ASSEMBLY INSTRUCTIONS PLEASE READ THE INSTURCTION CAREFULLY AND FOLLOW STEP BY STEP ●Propane Tank is not included ●Philips head Screwdriver (not provided) ●The following hardware is provided 4 I21Y06P-2 8pcs 1/4 x50mm philips head screw 3 4 5/32x10mm 2pcs 22pcs 1/4 x15mm head sc…

23, GRILL LIGHTING INSTRUCTIONS If the smell of gas is detected and the igniter is not functioning, immediately turn the control knob “OFF”. Allow 5 minutes for any accumulated gas to dissipate. If the side burner igniter is not functioning, see the following section for match lighting. WARNI…