Enplus EVO UPS 6000VA Operation & User’s Manual

39, 46 11. Manual Bypass Operation (Switching from ONLINE to BYPASS) *Used only when External Manual Bypass switch is installed. UPS configurations 1. Various settings that have been chosen are shown in the UPS setting display. 2. To enter configuration mode, press the “FUNC�…

7, 7 battery discharge, and as soon as voltage comes back, the UPS will automatically charge up and start recharging the batteries. As shown in fig.1 block diagram:  An input filter reduces transients on the mains  For maintaining full battery charge, AC-power is rectified and re…

25, Enplus EVO UPS 6000VA 25 8. Maintenance With a minimal amount of maintenance, you can expect the UPS to application, otherwise consider changing the batteries. have a long life free of trouble. The most critical issues for the reliability of the UPS are environmental issues. Ensure that the tempe…

10, 10 User’s operations  The only operations that users are permitted to do are:  Turning the UPS unit on and off  Operating the users interface Connecting data interface cables All such operations are to be performed exactly as instructed in this manual. The gr…

30, 30 UPS Dimensions W x D x H mm (inch) W/O ISOTR 428 x 597 x 130 (16.9” x 23.5” x 5.1”) 428 x 658 x 130 (16.9” x 25.9” x 5.1”) Net Weight kg (lb) W/O ISOTR 20 (44.0) 24 (52.8) UPS Shipping Weight kg (lb) W/O ISOTR 24 (52.8) 28 (61.6) Environmen…

19, 19 3. “FUNC” button: Each function can be enabled by pressing this button & “ENTER” button. (a) Push the “FUNC ” button (at least 2 seconds) to choose which function that you want. Each content can be displayed by pressing at once, and it has …