Stratco Outback Flat Verandah Installation Manual

1, INSTALL AT ION GUIDE ADDITIONAL MATERIALS TOOLS REQUIRED                  …

2, Front Fascia Beam End Fascia Beam BIP foam Steel Silicone here 10x16 Self-drilling screws at maximum 250mm centres M10 Hex boltsM10 Hex bolts Extended fascia strengthening bracket Angle bracket 12x20 screws 60mm angle bracket Tie down brace Galvanised RHS reinforcement Cross Secti…

3, Two 10x16 self-drilling screws on each side 15mm Wall Bracket Two M8 masonry anchors or two 8mm diameter screwbolts with a minimum embedment of 65mm 1.0mm Stepped Back Channel Suspension Bracket 10x16 Hex head screws to steel 12x25 Type 17 screws to timber Post Bracket Fasten with two 10…

4, Stratco Outback Flat Verandah First end fascia beam Front fascia beam Intermediate beam Wall bracket or suspension bracket Adjustable construction props Purlin A B C D Diagonal measurement Fall Fall Fall toward the downpipe position Adjustable construction prop Depth Width Half brick Corbel Column embedded mini…

5, Back Channel 12x20mm Hex Head Self Drilling Screws with Domed Washers Outback Deck Outback Deck Outback Rooflite Rooflite Infill Foam Insert 3mm Rivets 250mm Outback Deck Dip in the profile No dip in the profile Outback Deck Outback Rooflite profile Note: each side of the profile is di…

6, FINAL FIXING MAINTENANCE Concrete raised up to column M12x75 masonry anchors or M10x75 screwbolts Column Footing plate Figure 9.0 Figure 9.1 Final Fixing into the Concrete Footing Thoroughly check the posts with a spirit level. When plumb, ll the post hole with approx…