Denwa Communications DW-210P Operation & User’s Manual

16, www.denwaip.com 5. Input the number. Press 2aB softkey if necessary to change the input method. 6. Press Save to save the change. 7. To hear a new voicemail, press the Voicemail softkey. Then press Dial. It may then be neces- sary to enter a password. 4.9.4 Ping The phone has …

53, www.denwaip.com Field Name Explanation DND（Do Not Disturb） Enable Call Transfer Semi-Attended Transfer DND might be disabled, phone for all SIP lines, or line for SIP individually. If enabled, Call Transfer is allowed. If enabled, Semi-Attended Transfer is allowed. Enable Auto Hand…

8, www.denwaip.com 3. The phone’s LCD screen displays “INITIALIZING”. Later, a ready screen displays the date, time and current network mode. If your LCD screen displays different information from the above, more information may need to be entered. Please refer to the next section. If your…

23, www.denwaip.com Maximum message length is 12 characters. 3. Press Save. 4. Use BACK or EXIT to return to idle screen. 6.7 Language 1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Language Set ->Enter. 2. Use vol-/vol+ to choose English or Chinese. 3…

48, Denwa Communications DW-210P www.denwaip.com STUN blinding period – STUN packets are sent at this interval to keep the NAT mapping active. Binding Period Shows whether or not STUN NAT Transversal was successful. STUN Server IP address STUN Server Port – Default is 3478. STUN NAT Transversal Server Addres…

40, www.denwaip.com Field Name Explanation Enter the values for the current year, month, day, hour and minute. All values are required. Note: Be sure to disable SNTP service before entering manual time and date. Manual Time Settings Daylight Saving Time Settings Date Format Date Separator Enable …