DFI-ITOX G4V300-D Operation & User’s Manual

17, 2 Hardware Installation 17 2.2.1 Installing the DIM Module A DIM module simply snaps into a DIMM socket on the system board. Pin 1 of the DIM module must correspond with Pin 1 of the socket. 1. Pull the tabs which are at the ends of the socket to the side. 2. Posit…

6, DFI-ITOX G4V300-D Introduction 1 6 1.1 Features and Specifications 1.1.1 Features Chipset  Intel ® 845GV chipset - Intel ® 845GV Graphics Memor y Controller Hub (GMCH) - Intel ® 82801DB I/O Controller Hub (ICH4) Processor The system board is equipped with Socket 478 for installing one of th…

97, 97 4 Supported Software 4.2.4 USB 2.0 Drivers If you are using a USB 2.0 device, you must install the USB 2.0 driver. The drivers are supported in the following operating systems: Windows  98 SE, Windows  ME, Windows  2000 and Windows  XP. To install the driver, …

77, 77 3 Award BIOS Setup Utility 3.1.6 PnP/PCI Configurations This section describes configuring the PCI bus system. It covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. 3.1.6.1 Res…

47, 2 Hardware Installation 47 2.8.12 Power Connectors We recommend that you use a power supply that complies with the ATX12V Power Supply Design Guide Version 1.1. An ATX12V power supply has a standard 20-pin ATX main power connector and a 4-pin +12V power connector th…

104, A 104 Enabling Hyper-Threading Technology e. Lastly, press the <Ctrl> <Alt> and <Del> keys simultaneously. The Windows Task Manager dialog box will appear. Click the Performance tab. The diagram under CPU Usage History should resemble the one shown below. …