eLine ELI-SIP-B21-312R Instruction Manual

18, 25 26 Web Configuration 6.7.1 Local Network The Local Network page shows the camera’s current IP address and network parameters if DHCP is enabled. It also allows you to set a static IP address for the camera (see below), set the networking parameters, and to select…

34, 57 58 Resetting to Factory Defaults 7. RESETTING TO FACTORY DEFAULTS Follow the steps below to revert all settings to factory defaults. The camera must be connected to power to perform a factory reset. 1. Remove the camera underside screws (2x) 1. 2…

16, eLine ELI-SIP-B21-312R 21 22 Web Configuration The Live Video Menu contains the following options: • Full Screen: Open the video in full screen. Press ESC to exit full sc reen. • Sensor Config: Configure the camera sensor settings. See “6.17 Sensor Configuration” on pa…

4, Features • HD CMOS Progressive Scan • 720p or 1080p models with real-time (25/30 fps) • Triple-streaming (H.264/MJPEG) • Future proof ONVIF 2.1 compliance (1.02 backwards c o mpatibl e) • Compatible with popular third party VMS softwar e* �…

25, 39 40 Web Configuration 4. Configure the f o ll owing: • IP: Enter the IP address of the NAS. • Path: Enter the NAS folder where video files will be saved. NAS folder must be located directly under the root folder of the NAS (e.g. /public ). • …

9, 7 8 Finding the Camera’s IP Address 4. FINDING THE CAMERA’S IP ADDRESS Use the steps below to find the camera’s IP address and connect to the camera over the local area network (LAN) using NVMS, UPnP on Windows® 7, or Bonjour® in Mac OS®. 4.1 Find…