Elite Screens Vmax Series Operation & User’s Manual

7, 092514-JA www.elitescreens.com 7 Control System and Screen Operation The VMAX Dual series screen’s main unique feature is the ability of changing the screen’s ratio to 2.35:1and 16:9 with the push of a button with the RF remote (Radio Frequency). This is accompl…

5, 092514-JA www.elitescreens.com 5 2. Drill four holes in the ceiling and insert the hollow wall anchors (A) in each of the drilled holes. Two or more people are required for the next steps 3. Carefully bring up the screen and align the end flange holes of the screen wit…

2, 092514-JA www.elitescreens.com 2 Pre-Installation 1. Carefully unpack the screen. 2. Always handle the screen in a leveled position on a clean surface. 3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such as dust, …

1, Elite Screens Vmax Series 092514-JA www.elitescreens.com 1 VMAX Dual Series Dual Format Electric Projection Screen User’s Guide Important Safety and Warning Precautions Make sure to read this user’s guide and follow the procedures below. Caution: The screen’s Black Top Drop is already s…

8, 092514-JA www.elitescreens.com 8 Press “UP” button on the RF remote to retract the screen into the housing. 2. Wireless 5-12 volt trigger operation The VMAX Dual may be controlled through a projector’s 5-12 volt trigger through the Radio Frequency remote con…

6, 092514-JA www.elitescreens.com 6 2. Insert the nuts (I) and washers (H) into every threaded screw rod (F) as shown on Fig 1. 3. Next, insert the expansion anchors (G) in the four drilled holes and put the threaded screw rod in the expansion anchors (Fig 2). 4. Then fasten the nuts (I…