Diamond View DV154 Manual 

21, Diamond View DV154 17 No image is displayed, what can I do? ♦ Check that the light (LED) next to the monitor’s power button is lit and is green in colour. If the LED is green, press the Exit button on the monitor to access the On Screen Display. If the message NON PRESET MODE appears there, please read chapter 7,…

16, 12 8 8 Adjusting the Monitor Picture Optimisation The easiest way to obtain an optimal picture is by using the Auto button. This only works reliably if the graphics adaptor is set to use one of the monitor’s factory modes (see Table 1 in the previous chapter) and if you are displayi…

15, 11 it is still visible after using the Automatic adjustment, you can usually improve the displayed image by manually adjusting the phase, horizontal position and pixel frequency settings using the "Geometry" menu. See Chapter 8, Adjusting the Monitor, for more details. • Wh…

7, 3 3 3 Unpacking the Monitor Please check that the following items are included with your monitor. If they are missing or damaged, please contact your place of purchase immediately . Locate the model name and the serial number label on the back of your monitor, a…

23, 19 Input Signal Line Frequency 31 - 63kHz multi-frequency Image Frequency (Refresh Rate) 56 - 75Hz Within the parameters detailed in chapter 7 Video Signal RGB analogue (Positive polarity) 0.7 Vpp/75 Ohm Synchronization TTL separate, composite TTL Signal Connection 15-pin mini D-sub cable Ph…

13, 9 7 7 Setting the Display Resolution Choosing the Best Resolution All Liquid Crystal Displays (LCDs) have a fixed resolution that is the same as the maximum resolution that may be displayed on the LCD monitor. In the case of the DV154 the LCD resolution is 1024 x 768 pixels. This is a…