Bunn ITCB Operating & Service Manual

14, Page 14 PROGRAMMING Using the menu-driven display on the front of the brewer, the operator has the ability to alter or modify various brewing parameters such as brew temperatures, brew volumes, dilution volumes, pulse brew, etc. This allows for the precise brewing of various fl avors of …

27, Page 27 PROGRAMMING THE BREWER (cont.) PROGRAMMING FUNCTIONS - LEVEL 2 (cont.) Tea recipes: DILUTE OZ: Range: 0.0 oz to 580.0 oz (0-17.1 L) for both batch sizes This function allows adjustment of the dilution volumes for each batch. NOTE: If the brewer is already on the DILUTE OZ: …

64, Page 64 PROBABLE CAUSE REMEDYPROBLEM TROUBLESHOOTING (cont.) Temperature Too Low Heating Time Too Long Fill Time Too Long Temp Sensor Out Of Range, Check For Bad Connections Temp Sensor Out Of Range, Check Wire For Shorts Equipment will not operate 1. Water temperature in the tank does …

19, Page 19 PROGRAMMING THE BREWER (cont.) PROGRAMMING FUNCTIONS - LEVEL 2 (cont.) UNITS This function allows the operator to select if numeric settings are displayed in English or Metric units. Procedure for setting the Units: 1. Press and hold the right hidden button until the display r…

26, Page 26 Procedure for modifying TEA recipes: Tea recipes: BREW OZ: Range: OFF, 10.0 oz to 135.0 oz (.3-4.0 L) for both batch sizes This function allows adjustment of the brew (tea con- centrate) volumes for each batch. 1. Press and hold the right hidden button until the dis- play reads SET LAN…

5, Bunn ITCB Page 5 USER NOTICES (CONT.) For 120/208V or 120/240 volt operation, replace Power Supply Cord only with Bunn-O-Matic part number 01699.0000. #34072.0000 #29710.0009 #34056.0001 /PTIONAL&IELD7IRING 6!�…