Adaptec 1210SA - Serial ATA RAID Controller Operation & User’s Manual

74, A-9 BIOS Utilities Using the SATA Configuration Utility The SATA Configuration utility enables you to modify the SATA Channel Interface options and SATA Device Configuration options. To access the SATA Configuration utility: 1 Turn on your computer and press Ctrl+A when prompted to acc…

58, 5-18 Using Adaptec Storage Manager – Browser Edition Enabling and Configuring the Notifier Service Before you begin to configure e-mail notification you need to have the following information available: ■ The SMTP mail server host name or IP address. ■ The port that SMTP mail server is…

8, vii Contents 1 Introduction Read this First 1-1 System Requirements 1-2 Operating System Compatibility 1-2 Storage Requirements 1-2 Motherboard Compatibility 1-2 Device Compatibility 1-2 Kit Contents 1-3 Adaptec 1210SA Controller 1-3 About the Documentation 1-4 Installing the Adobe A…

52, 5-12 Using Adaptec Storage Manager – Browser Edition Using the default settings will create an array of the largest possible capacity on the selected drives, use the default cache setting and, if appropriate, the default stripe size. To create an array using default settings: 1 O…

15, Adaptec 1210SA - Serial ATA RAID Controller 1-5 Introduction Controller Features The Adaptec 1210SA supports the following features: ■ RAID levels 0, 1 and simple volume using Adaptec’s HostRAID  technology. ■ PCI Local Bus Specification, Revision 2.2 with PCI clock speeds up to 66 MHz. ■ Operating system independent…

48, 5-8 Using Adaptec Storage Manager – Browser Edition Beneath the controller information are Physical Devices and Logical Devices views that show connected devices and existing arrays on this controller. Controller information and device views are repeated for each additional Adaptec RAI…