Adaptec RAID 2405 Installation And User Manual

64, Chapter 10: Solving Problems ● 64 Recovering from a Disk Drive Failure This section explains how to recover when a disk drive fails: ● If the array was protected by a hot spare (see page 64). ● If the array was not protected by a hot spare (see page 64). ● If there is a disk drive f…

52, Chapter 7: Installing the Driver and an Operating System ● 52 5 When all drivers have loaded, select No. 6 Complete the OpenServer installation, following the instructions included with your operating system. 7 Continue with Managing Your Storage Space on page 59. Installing with UnixWare Note: Y…

74, B Understanding RAID In this appendix... Understanding Drive Segments............................................................................................. 75 Non-redundant Arrays (RAID 0).......................................................................................... …

62, Adaptec RAID 2405 10 Solving Problems In this chapter... Troubleshooting Checklist..................................................................................................... 63 Silencing the Alarm................................................................................................................…

47, Chapter 6: Creating a Bootable Array ● 47 7 Review the information that is displayed. Note: In DAS environments, Adaptec Storage Manager uses the term logical drives when referring to arrays (see page 12). In this example, Adaptec Storage Manager has used thirteen equal-sized dis…

85, Appendix C: Using the Adaptec RAID Configuration Utility ● 85 Managing Existing Arrays To view or modify existing arrays, select Manage Arrays from the main ACU menu. From the Manage Arrays menu, you can: ● View the properties of an array. Note: Failed drives are displayed in a differe…