CARVIN XDrive XD88 Operation Manual

6, 6 wish to change. The values can then be changed with the Adjust UP/DOWN buttons. Pressing an OUTPUT select button from any screen, except when in SYSTEM or UTILITY menus, will bring up that channels screen. When you change from one OUTPUT to another, all the changes are saved in memo…

7, 7 Figure 1 above is a +12dB boost, 1kHz filter of varying bandwidth/oct. In the center (1) is the 0.04 minimum setting. Next are settings of 0.32oct (2), 0.64oct (3), 1.00oct (4), 2.00oct (5) and 3.00oct (6). 0.04oct has a narrow slope for picking out specific frequencies. 0.3…

17, 17 SPECIFICATIONS: INPUTS: Connector Female XLR & ¼” TRS 10kOhm electronically balanced Maximum Input +18 dBu Digital Controls: Gain 0dB to -32dB in 0.2dB steps EQ 30 Band Graphic 25Hz to 20kHz,…

5, CARVIN XDrive XD88 5 INPUTS: When the unit is first turned on, the Input A EQ screen will display. To adjust the Gain (volume) of the selected input use the Adjust UP/DOWN buttons. The range is 0db at maximum to -32db at minimum. To adjust the ‘faders’ press any of the 60 fader up/down …

12, 12 Once the system from memory is opened the copy procedure is the same as copying a local channel. Press COPY (SYSTEM button) to select the channel to copy and it will be marked with the ‘*’. Select the channel you wish to copy into and press PASTE (SYSTEM button). Th…

16, 16 B: Mono 3-way mains and 5 full range monitors. Router: OUTPUT1: Highs – LF= BUT12 1.03kHz HF = OFF OUTPUT2: Mids – LF= BUT12 311.2 Hz HF = BUT12 1.03kHz OUTPUT3: Lows – LF= OFF HF = BUT12 311.2 Hz C: 2-way Stereo Mains with Mono Sub and 3 full range monitors. …