Adaptec APD-29160 Installation Manual

5, 3 Adaptec PowerDomain 29160/29160N The box that contains the Adaptec PowerDomain 29160/29160N kit includes the items pictured below. The cables are located in compartments at each end of the box. Two internal cables are included with the 29160 package; two come with the 29160N. T…

22, 20 Installation Guide If you want to install external devices, go to the section Connect- ing External 50-pin Fast/Ultra-SE SCSI Devices (29160N only) on page 25 or Connecting External 68-pin LVD/SE SCSI Devices (29160 only) on page 22. If the computer or the devices do not work prop…

27, 25 Adaptec PowerDomain 29160/29160N Connecting External 50-pin Fast/Ultra-SE SCSI Devices (29160N only) Use a 50-pin external Fast/Ultra-SE cable to attach external Fast/Ultra-SE SCSI devices that have standard 50-pin connectors to the Fast/Ultra-SE external connector of the Adapt…

9, Adaptec APD-29160 7 Adaptec PowerDomain 29160/29160N Remove the Adaptec PowerDomain 29160 or 29160N from its antistatic bag. STEP 8 To prevent damage to the Adaptec PowerDomain 29160/29160N, always handle the PCI card by its metal bracket or its edges. Do not touch the gold connector or any of th…

12, 10 Installation Guide Setting SCSI IDs A SCSI ID uniquely identifies each SCSI device on the SCSI bus and determines priority when two or more devices are trying to use the SCSI bus at the same time. Each device attached to the Adaptec PowerDomain 29160 or 29160N, as well as the SC…

17, 15 Adaptec PowerDomain 29160/29160N Plug the remaining connector(s) into the internal LVD SCSI devices. After you have connected all your inter- nal LVD SCSI devices to the Adaptec PowerDomain 29160 or 29160N, plug a power cord bundle from the computer into each device. If you want to install …