Adaptec 7200S Operation & User’s Manual

9, 7 Configuring LUN Zoning 2 Select LUN Zoning, then press Enter. The LUN Exclude list or LUN Include list displays. The default setting for each partition LUN is Include All Hosts. This results in all hosts being able to access all partitions. You can change the list type using the Ch…

2, Copyright © 2001-2002 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Adap…

8, Adaptec 7200S 6 DuraStor 7200S LUN Zoning User’s Guide Configuring LUN Zoning Once you set up host names (aliases), you can easily set up your LUN zoning. This is where you determine which hosts can access each partition LUN. You set up LUN zoning by either excluding or including hosts on a list…

7, 5 Creating Names for WWNs Creating Names for WWNs To make LUN zoning easier to manage, you can assign names, or aliases, to the hosts. For example, you can use a computer name that has already been assigned. You can determine which WWN is for which host by booting one host at a …

6, 4 DuraStor 7200S LUN Zoning User’s Guide Viewing Known WWNs You can view a list of 16 host WWNs that the controller is aware of on your SAN. The controller is aware of any host that was booted since the controller was last restarted. Typically, hosts scan for devices during their boot p…

3, 1 Using LUN Zoning In this Guide To increase flexibility and provide more effective partitioning of your storage infrastructure, the Adaptec DuraStor 7200S controller supports LUN zoning. Using LUN zoning, you can allow a host to access a specific set of LUNs on an array while restricting acces…