Circuit-test DCL-620 Operation & User’s Manual

11, - 11 - REL Button For Offset adjustment. Data Hold Button To freeze the LCD meter reading, press the data hold button. While data hold is active, the HOLD display icon appears on the LCD. Press the data hold button again to return to normal operation. RANGE Button When the meter is…

4, Circuit-test DCL-620 - 4 - Meter Description 1. Current Clamp 2. Non-contact AC voltage indicator 3. Clamp trigger 4. Data Hold and Backlight button 5. Function switch 6. Hz % button 7. RANGE button 8. Relative button 9. MIN/MAX button 10. MODE button 11. LCD display 12. COM input jack 13. Positive input …

10, - 10 - 5. Read the temperature in the display. The digital reading will indicate the proper decimal point and value. WARNING: To avoid electric shock, be sure the thermocouple has been removed before changing to another measurement function Non-Contact AC Voltage Measurements WARNING: R…

5, - 5 - Specications Function Range & Resolution Accuracy (% of reading) AC Current (50/60Hz) 600.0 AAC ± (2.8 % + 8 digits) 1000 AAC ± (3.0 % + 8 digits) AC Current (400Hz) 600.0 AAC ± (5.0 % + 10 digits) 1000 AAC ± (5.0 % + 10 digits) DC Voltage 600.0 mVDC ± (0.8% + 2 digits) …

3, - 3 - CAUTIONS Improper use of this meter can cause damage, shock, injury or death. Read and understand this user manual before operating the meter. • Always remove the test leads before replacing the battery. • Inspect the condition of the test leads and the meter …

8, - 8 - Resistance Measurements 1. Insert the black test lead into the negative COM terminal and the red test lead into the positive terminal. 2. Set the function switch to the Ω position. 3. Touch the test probe tips across the circuit or component under test. It is best to disconnect one…