Clavia Nord Electro 3 HP Operation & User’s Manual

24, About the MIDI implementation The following MIDI messages can be transmitted and received from the Nord Electro 3: Note On/Off • Note On and Note Off messages are transmitted and received. Controllers In the MIDI Menu (see page 19), you can select if the Nord Electro 3 should transmit a…

7, Pedal Connections The Nord Electro 3 has three pedal inputs; one for a sustain pedal, one for a pedal to control the rotor speed and one for a control pedal (an expression type pedal), which can be used to control various param- eters. Sustain Pedal ¼" connector for a switch typ…

19, Ctrl Pedal Type The Electro 3 HP has a slightly changed interface for the Ctrl Pedal input where some of the most common pedals are supported. Range: P1 (Roland EV-5, default) , P1 (Roland EV-7), P3 (Yamaha FC-7), P4 (Korg EXP-2 & XVP-10), P5 (Fatar & Studiologic VP/2…

6, Clavia Nord Electro 3 HP Audio connections Headphones This is where you connect a ¼" stereo connector from a pair of head- phones. Left Out and Right Out The left and right line level outputs from the Nord Electro 3 are unbal- anced. Use ¼" connectors to connect the Nord Electro 3 to an amplifier or recording …

22, File Formats The Nord Sound Manager creates and/or uses files with the Electro 3, with the following extensions: • .npno - These are the piano files from the Nord Piano library. • .nsmp - These are the sample files from the Nord Sample library. • .nepg - These are the Program files. �…

10, 2 Press repeatedly on the selector to cycle through the various options. The knob controls the drive for the three amps and the rotary simulator, and the amount when the compressor is selected. Selecting a piano or a sample 1 Make sure that the Piano instrument selector is active. 2 Pre…