Clay Paky ALPHA SPOT QWO 800 ST Instruction Manual

18, 18 ALPHA SPOT QWO 800 & “ ST ” Periodical cleaning - Fig. 19 To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The frequency with which the following operations are to be carried out…

6, Clay Paky ALPHA SPOT QWO 800 ST 6 ALPHA SPOT QWO 800 & “ ST ” 6 28 28 Reversal of the display - Fig. 9 To activate this function, press UP B and DOWN C keys simultaneously while the display is in the rest mode. This status will be memorised and maintained even for the next time it will be switched on. To return to t…

30, 30 ALPHA SPOT QWO 800 & “ ST ” • LAMP CONTROL (only with option LAMP DMX On) - channel: 32 IMPORTANT: Alpha Spot QWO 800 is not provided with hot restrike igniter LAMP ON (FULL POWER) LAMP ON (FULL POWER) BIT %EFFECT 255 100 180 70.5 0 0.0 101 39.5 100 39.0 LAMP OFF 179 70.0…

10, 10 ALPHA SPOT QWO 800 & “ ST ” SHUTTER Shutter on error Used for automatically closing the stop/strobe in the event of Pan/Tilt position error. 1) Press F - the current settings appear on the display (On or Off). 2) Use the UP B and DOWN C keys to enable (On) or disable (Off) a…

20, 20 ALPHA SPOT QWO 800 & “ ST ” Extraction of the effect modules - Fig. 21 IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged. Insertion of the effect modules: Repeat the operations indicated in Fig. 20, 21 and 22 in reverse order. Upper S…

31, 31 ALPHA SPOT QWO 800 & “ ST ” Timing Channel Channel function 33 Pan - Tilt time Pan - Tilt - (Pan fine - Tilt fine) 34 Colour time …