Compex NetPassage 28G Quick Install Manual

14, Chapter 6 Getting Started with Wizard Setup 12 If WPA-PSK is enabled, select Hex or Ascii for the key string type to be used. The default WPA-PSK is ‘11111111’. The default GTK update is ‘600’. To proceed, click on the Next button. …

15, Chapter 6 Getting Started with Wizard Setup 13 Then the Wizard will detect if any of the USB devices such as printer, storage disk or webcam are connected to the router. For more details on setting up USB devices, refer to User’s Manual. If you want to al…

5, Compex NetPassage 28G Chapter 3 Let’s Get Going – Hardware Setup 3 Chapter 3: Let’s Get Going-Hardware Setup Power Up in 4 Steps: In 4 simple steps, you shall have your router wired and functional. After which, you may proceed to the software configuration and get yourself ready to surf the …

13, Chapter 6 Getting Started with Wizard Setup 11 To configure the following parameters: • SSID The default SSID is ‘compex’. Click on the Change button to enter your preferred SSID name. Remember to change your wireless clients’ settings illustrated …

8, Chapter 5 Configuring TCP/IP Settings 6 Chapter 5: Configuring TCP/IP Settings You should configure your PC or wireless client to obtain IP address automatically. For users of Microsoft Windows XP, you may configure the TCP/IP settings as follows: Click the Start b…

7, Chapter 4 Configuring Wireless Network Connection 5 At the Network name (SSID) field, type in ‘compex’ ( the factory default of the router ). Click OK. …