Comtrol RocketPort PCI Series Hardware Installation Manual

7, 7 Cabling Requirements • RocketPort PCI 4-port RJ45 and RocketPort PCI 8-port RJ11. Cabling Requirements Use the appropriate pinout specification provided below for your hardware. DB9 Interface Connectors There are Quadcable and Octacable models available with DB9 connectors …

11, 11 RJ11 Interface RJ11 Interface The RocketPort PCI/8-port RJ11 features eight standard RJ11 modular connectors, located on the controller board mounting bracket. The ports are numbered 0 through 7, with Port 7 being the connector closest to the bus. RJ11 Pinouts The following f…

14, 14 Specifications Surge Interface Operating Specifications Limit Maximum surge current (8x20uS) 100 amps (total) Capacitance <350pf Clamping voltage 30 volts Clamping response time <5 nanoseconds Transient energy (10/1000 MS) 300 mJ Inductance <1.5 nh ESD withstand (surge-…

10, Comtrol RocketPort PCI Series 10 Pinouts for the RJ45 Interface Module Pinouts for the RJ45 Interface Module The following figures provide pinout information for the RJ45 plug and receptacle for the RJ45 interface module. Building RJ45 Loopback Plugs Loopback connectors are plugs, with pins wired together as shown,…

15, 15 FCC Notices FCC Notices Radio Frequency Interference (RFI) (FCC 15.105) This equipment has been tested and found to comply with the limits for Class A or B (depending on the model) digital devices pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radi…