Concox GT06N Operation & User’s Manual

11, The command is: CENTER,D# For example: CENTER,D# If set successfully, there is an “OK” reply SMS. NOTE ： Only the SOS number can be used to delete center number successfully. Only SOS phone number can send this command successfully to set the center number.…

12, upload positioning data to the platform server every 10s. Users can modify GPRS time sending interval by SMS “TIMER,time(second)#”. The time ranges from 10-18000s For example: TIMER,10# It means the device will uploa…

2, Concox GT06N 1. Accessories: Please check the accessories before using. Pictures are for indication and illustration purposes only. 2. Features: ● GSM 850/900/1800/1900 Quad band ● Wide for voltage input range: 9-36vDC ● GPS continuous positioning, GPRS timing inte…

3, battery) ● Compatible with external connection through (serial port) ●Geo-fence via sms command 2.1 Red LED (power/working status) LED Status Meaning Flashing (interval 0.1s) Low battery indication Continuously in bright state Charging Slow flashing(interval 0.…

4, 4. Method of installation 4.1. Preparation before installation 4.1.1 Open the packing box to check whether the type of device is correct and whether the accessories are included, or else please contact your distributor. 4.1.2 Choose SIM card: each device needs to i…

13, and GPS LED will flash. Once GPS LED keeps solid light, it means the device has been located and it starts to work. Power off: Just turn off the power switch. The device will begin to upload positioning data to server once inserting a valid SIM card and power on. During the working time, it can…