ADS Technologies API-408 Operation & User’s Manual

11, 11 Step 7 If necessary, remove the knockout on the back of your computer which cor- responds to the PCI slot you have confirmed as your selection. If there is a screw, place it in a safe place as you will be using it to attach the PYRO 1394 PCI Card. Step 8 Pus…

25, 25 Tips for Smooth Video Capture If your system is not optimized, the result may be dropped video frames. Video with dropped frames will look jittery and will have audio dropouts. To ensure that you capture the highest quality video you may want to fol- low these steps: 1. Run Disk Defragmenter. Cr…

29, 29 For Specific Video Studio software questions: Check the Ulead web site: www.ulead.com E-mail Ulead for help: http://www.ulead.com.tw/ulead/suppform.cfm Call Ulead for help: 1-310-896-6391 For PYRO Hardware questions: Check the ADS web site: www.ads…

3, ADS Technologies API-408 © 2002 ADS Technologies. All Rights Reserved First Edition: Revision 1.1 May, 2002 Microsoft, MS-DOS, Windows, Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation. IBM is a registered trademark of the International Business Machines, Inc. ADS is a register…

34, European Office Shannon Industrial Estate Shannon Co. Clare, Ireland Phone: +353.61.702042 North America Office 12627 Hidden Creek Way Cerritos, CA 90703 Phone: (562) 926-1928 Fax: (562) 926-0518 Support: (562) 926-4338 www.adstech.com …

21, 21 your movies and project information to be stored. 5. Once you click OK you will be taken to Capture Mode(if your camcorder is connected and turned on in VCR/VTR mode). If you are not taken to Capture Mode, then Video Studio is not properly recognizing your camcorder, or you op…