D-MAX DSC-2000Si Operation & User’s Manual

37, 35 Connect the Hous⑥ ing with the camera body. Please check the triangular mark on the side of the body and inside. ⑦Connect th…

23, 21 Selection of this menu. 18. TRACE SET PAGE Set TRACE. User can regenerate and save a change of the unrestricted location of ZOOM In/Out and a position of the camera by hand-worked control with a joystick. User can see the screen when moves…

28, 26 4-3. Functional Setting, Operating/Deletion by the Keyboard 1. Preset setting You can set Preset point up to 250. Preset Input.① Preset setting can be set 1 to 250 sequentially after moves the camera to where you want ② Preset Move The camera m…

17, 15 4. AGC LEVEL AGC(Automatic Gain Control)- It adjusts the amount of video amplification to maintain a full 1-volt peak-to-peak video signal output automatically. ▶ Range : Auto, 8Db, 10Db, ----- 38dB 5. SHUTTER SPEED As a setting shutter speed mode, it c…

16, 14 4-2. Functional Descriptions of each Menu. 1. ID SET. It is the function to set ID of the camera. Move to No.1 menu and the screen moves as following when user presses F/F key. User can choose letters that they want, if user control a joystick up / down / right / left, and user can …